Lighting

12" Exterior Wall Lamp

Glass Refractor Wall Pack fixture for HID lamp,totally enclosed. Housing is seamless copperfree die-cast aluminum. Lens assembly consists of a hinged, rigid die-cast copper-free aluminum frame and clear borosilicate refractor glass lens held securely inside. Lens frame is easily removable and allows for easy attachment and serviceability using top pivoting hinge. Complete silicone gasketing around lens and gasketing at mounting provide a watertight seal. A precision specular aluminum reflector provides forward throw with wide distribution to ensure wide fixture spacings and maximum light levels. The optical chamber is sealed to reduce dirt and insect contamination. Furnished with e-coated, copper-free, lightweight mounting box designed for installation over standard 4-inch square or octagonal and single-gang J boxes and for conduit entry from top, sides and rear. Designed and approved for easy through-wiring. All fixtures use vertical-lamp position.

Price per Unit (piece): Call for Pricing

Number pieces in packaging: 1

Number pieces in box: 1

Availability: Usually ships in: 2-3 Weeks

12" UP/DOWN Cutoff

Aluminum die cast housing supplied. Knockouts are provided on the back of the housing for 1/2" conduit entry or for mounting over a single gang box, 4" square or 4" octagon boxes. Two #8 x 1" threaded studs and nuts are provided for mounting over a junction box. Housing also includes 1/2"-14 NPT threaded hubs on four sides for conduit entry. Closed cell neoprene sponge gasketing on the back of the housing provides a watertight mounting seal. Silicone sponge cord gasket between housing and lens ensures a water- and insect-tight seal. Injection molded clear polycarbonate lens and shroud assembly is held in place using a hidden spring clip assembly. Combination of internal painted shroud and diffuse reflector provides controlled uplight and downlight with side cutoff.

Price per Unit (piece): Call for Pricing

Availability: Usually ships in: 2-3 Weeks

16" Parking/Road Light

Parking lot and roadway luminaire for HID lamp, totally enclosed. Supplied with IES Type III (250W MH is field adjustable to Type II) optical system. Housing is seamless, die-cast aluminum. Mounting consists of a 1.8" (44 mm) wide by 4.5" (114 mm) high by 6"-(152 mm) long extruded aluminum arm. The arm is held in place with two 3/8" (9 mm) mounting rods fastened to a steel backing plate inside the pole, and by two nuts inside the fixture housing. Mounting rods are provided with sealing washers to prevent water leakage. Lens assembly consists of rigid aluminum frame and high-impact, clear-tempered glass.

Price per Unit (piece): Call for Pricing

Availability: Usually ships in: 2-3 Weeks

Crown-Weld Poles

Non-tapered poles are supplied with welded base with cover, four galvanized anchor bolts, masonite mounting template and a pole cap (except tenon mount). Each bolt is provided with two washers and two nuts. Steel pole base has slotted holes. Per National Electrical Code requirements, pole is standard with a 2" (51 mm) x 6" (152 mm) hand hole, located 12" (305 mm) above bottom of pole base. A #10-32 stainlesssteel weld stud with grounding lug is located inside pole, opposite hand hole; a hand hole cover is supplied but shipped separately. For EPA ratings, see “Windloading — Square Poles” sheet. Poles longer than 30' are segmented but shipped assembled.

Price per Unit (piece): Call for Pricing

Availability: Usually ships in: 2-3 Weeks

Fluorescent High Bay (four lamp)

Low profile fixture is 3.5" high and has four T5HO or T8 lamps and a choice of six optical configurations. T5 available in narrow or medium light distributions. T8 available in medium or wide light distributions. Supplied with high efficiency Specular Aluminum or Prismatic Acrylic reflectors. Optional 2-Level control, configurable with a two-way switch for “all off” or “partial off”. Unit has an access cover for 3/4" conduit and wire entry and mounts with furnished wire-form hangers or with optional hook accessory. It is configured for hard wiring or with cord & plug. EZ Connect Modular 10- gauge or 12-gauge wiring is also available. Push-nut supply wire connectors are supplied and unit is prepared for lens and/or wire-guard accessories. Fixture should not be used in an environment where any concentrations of industrial cutting fluids are used.

Price per Unit (piece): Call for Pricing

Number pieces in packaging: 1

Number pieces in box: 1

Availability: Usually ships in: 2-3 Weeks

Fluorescent High Bay (two lamp)

Low profile fixture is 3.5" high and has two T5HO or T8 lamps and a choice of two optical configurations. Supplied with high efficiency Specular Aluminum or Prismatic Acrylic reflectors. Unit has an access cover for 3/4" conduit and wire entry and mounts with furnished wire-form hangers or with optional hook accessory. It is configured for hard wiring or with cord & plug. EZ Connect Modular 10-gauge or 12-gauge wiring is also available. Push-nut supply wire connectors are supplied and unit is prepared for wire-guard accessory. Fixture with acrylic reflectors should not be used in an environment where any concentrations of industrial cutting fluids are used.

Price per Unit (piece): Call for Pricing

Number pieces in packaging: 1

Number pieces in box: 1

Availability: Usually ships in: 2-3 Weeks